Department

Gas Chemistry and Gas Treatment

The challenge facing the gas industry is to reconcile the increasing quality requirements of end customers with changing gas qualities. Our Gas Chemistry & Gas Treatment department accompanies this process analytically from the source to the end customer. As an accredited gas chemistry laboratory, we act as an intermediary between basic research and industry and are the point of contact and support for the transfer of new developments to the gas supply.

Main topics

Accreditation

We have a DAkkS-accredited testing laboratory in accordance with DIN EN ISO/IEC 17025:2018, No. D-PL-14614-01-00.

Our accredited gas chemical laboratory offers extensive test procedures. These can be found in the table below. If you have any questions about our approvals and accreditations, please do not hesitate to contact us.

Sampling
ParametersStandardIssue statusCategory C*Category A**
Liquid gas samplingDIN EN ISO 42572002-03x
Natural gas samplingDIN EN ISO 107152023-03x
Testing of liquefied gases – SamplingDIN 516101983-06x
Testing of fuel gases – SamplingDIN 518532011-12x
Testing of gaseous fuels and other gases
gases, determination of ammonia content
(sampling)
DIN 518541993-09x
Testing of gaseous fuels and other gases
Gases, Determination of mercury content – Part 3:
Absorption in solutions, AAS (sampling)
DIN 51865-31998-02x
Direct natural gas sampling under pressure for
determination of gas by-products
DBI GUT 192023-02x
Sampling of trace components C9-C22, for
determination with TDS/capillary GC
DBI GUT 202012-02x
Determination of the gas composition of fuel gases and other gases using gas chromatography with conventional detectors (FID, WLD)
ParametersStandardIssue statusCategory C*Category A**
Determination of the composition of natural gas with defined uncertainty by GC – Part 3: Determination of hydrogen, helium, oxygen, nitrogen, carbon dioxide and hydrocarbons up to C8 using two packed columns (withdrawn standard)DIN EN ISO 6974-32019-02x
Determination of the composition of natural gas with defined uncertainty by GC – Part 3: Determination of hydrogen, helium, oxygen, nitrogen, carbon dioxide and hydrocarbons up to C8 using two packed columns (withdrawn standard)DIN EN ISO 6974-32002-06x
Natural gas- Determination of composition with defined uncertainty by GC- Part 4: Determination of nitrogen, carbon dioxide and C1-C5 and C6+ hydrocarbons for a laboratory and online measurement system with two columnsDIN EN ISO 6974-42002-06x
Determination of the composition of natural gas with defined uncertainty by GC – Part 6: Determination of hydrogen, helium, oxygen, nitrogen, carbon dioxide and hydrocarbons C1 to C8 using three capillary columnsDIN EN ISO 6974-62005-08x
Natural gas extended analysis – gas chromatographic methodDIN EN ISO 69752005-09x
Commercially available propane and butane – gas chromatographic analysisDIN EN 279411993-12x
Testing of mineral oil hydrocarbons – determination of the composition of liquefied petroleum gas – gas chromatographic analysis with special consideration of 1,3-butadiene with mass fractions ≤0.1 %(m/m)DIN 516192004-02x
Testing of gaseous fuels and other gases, determination of components, gas chromatographic methodDIN 51872-41990-06x
Determination of accompanying substances in fuel gases and other gases using gas chromatography with conventional detectors (FID, FPD, WLD, IMS, electrochemical detector)
ParameteraStandardIssue StatusCategory C*Category A**
Determination of sulfur compounds in natural gas using gas chromatographyDIN EN ISO 197392009-08x
Testing of gaseous fuels and other gases – Determination of the content of sulphur compounds – Gas chromatographic determination of the content of sulphur-containing odorants using an electrochemical detector detectorDIN 51855-71986-12x
Testing of gaseous fuels and other gases – Determination of the content of sulphur compounds – Part 8: Gas chromatographic determination of dihydrogen sulphide, carbon oxide sulphide and other sulphur compounds using specific detectorsDIN 51855-81997-06x
Determination of glycols with capillary GCDBI GUT 162024-01x
Determination (analysis) of trace components C9-C22 using TDS/capillary GCDBI GUT 212012-02x
Gas chromatographic determination of alcohols and ketonesDBI GUT 222013-07x
Determination of permanent gases in the trace range using gas chromatographyDBI GUT 302023-03x
Determination of glycols in fuel gases and other gases using gas chromatography with mass selective detector (MSD)
ParametersStatusIssue StatusCategory C*Category A**
Determination of glycols with capillary GCDBI GUT 162022-07x
Analysis of organic silicon compounds using adsorptive enrichment and gas chromatography/mass spectrometryDBI GUT 272024-02x
Determination of accompanying substances in fuel gases and other gases
ParametersStandardIssue StatusCategory C*Category A**
Water quality determination of dissolved anions using liquid chromatography-Part 1: Determination of bromide, chloride, fluoride, nitrate, nitrite, phosphate, sulphateDIN EN ISO 10304-1 (D20)2009-07x
Determination of the water content of natural gas according to Karl-Fischer
Part 3: Coulometric method
DIN EN ISO 10101-32022-12x
Petroleum products and hydrocarbons. Determination of sulphur content; combustion according to Wickbold (withdrawn standard) (deviation: application to natural gas and other gases, additional determination of chloride and fluoride)DIN EN 242601994-05x
Testing of gaseous fuels and other industrial gases – Determination of the content of sulphur compounds – Part 6: Content of hydrogen sulphide, mercaptan sulphur and carbon oxide sulphide sulphur, potentiometric methodDIN  51855-62000-09x
Testing of gaseous fuels and other gases – Determination of water content using the Karl Fischer coulometric methodDIN 518692000-09x
Standard-Prüfverfahren zur Bestimmung des gesamten flüchtigen Schwefels in gasförmigen Kohlenwasserstoffen und verflüssigten Erdölgasen mittels Ultraviolett-FluoreszenzASTM D6667 2014x
Standardprüfverfahren für die Analyse der Wasserstoffreinheit unter Verwendung eines kontinuierlichen Hohlraum-Ringspektroskopie-AnalysatorsASTM D79412014x
Calculation of physical and physico-chemical parameters
ParametersStatusIssue StatusCategory II*Category III**
Determination of natural gas composition and associated uncertainty by gas chromatography – Part 2: Uncertainty calculationDIN EN ISO 6974-22012-11x
Natural gas calculation of calorific and heating value, density, relative density and Wobbe index from the compositionDIN EN ISO 69762016-12x
Gas analysis- Conversion of composition data for gas mixturesDIN EN ISO 149122006-11x
Natural gas – relationship between water content and dew pointDIN EN ISO 184532006-01x
Testing of liquid gas – calculation of the calorific valueDIN 516121980-06x
Fuels for motor vehicles – natural gas – requirements and test methods (withdrawn standard) (here: calculation of methane number)DIN 516242008-02x
Gaseous fuels and other gases – calculation of calorific value, heating value, relative calorific valueDIN 518571997-03x
Liquid fuels and technical liquids
ParametersStandardIssue StatusCategory C*Category A**
Water quality- Determination of the pH value (deviation: application to technical liquids)DIN EN ISO 10523 (C5)2012-04x
Water quality – Determination of dissolved anions by liquid chromatography – Part 1: Determination of bromide, chloride, fluoride, nitrate, nitrite, phosphate, sulphate (Deviation: Application to condensates, here no phosphate)DIN EN ISO 10304-1 (D20)2009-07x
Petroleum and related products – Determination of pH of flame retardant liquids of category HFAE, HFAS and HFCDIN EN ISO 208432011-04x
Petroleum products and hydrocarbons – Determination of sulphur content of automotive fuels – Ultraviolet fluorescence methodDIN EN ISO 208462012-01x
Petroleum products and hydrocarbons – Determination of sulphur content, combustion according to Wickbold (withdrawn standard) (Deviation: Determination of chloride and fluoride)DIN EN 242601994-05x
Testing of liquid mineral oil hydrocarbons – Determination of chlorine content, combustion according to WickboldDIN 51408-11983-06x
Mineral oil products – Determination of water content by titration according to Karl-FischerDIN 517772020-04x

**Flexible accreditation category A
Extension of the scope of accreditation by standardized or equivalent test methods with different issue dates within a defined test scope

Flexible accreditation category B
Includes category A and the addition of standardized or equivalent test methods within a defined test area to the scope of accreditation. Includes, as far as applicable, new specifications for test stands, provided that these can be determined with the procedure within the test scope.

*Flexible accreditation of category C
includes categories A and B as well as additions to the scope of accreditation for modified, further developed and newly developed test procedures (including in-house procedures) within a defined test area

Vacancies

Growing together with the DBI Group. Support the Gas Chemistry & Gas Treatment department as:

Jobs

ATheses & internships

Student Assistant (m/f/d)

Your contact to us

Head of Department

Udo Lubenau

(+49) 341 – 24 57 160
(+49) 341 – 24 57 136

Your career at the DBI Group

Over 150 motivated employees, flat hierarchies and a pleasant working atmosphere are the hallmarks of a committed team. We see ourselves as a reliable employer that supports and challenges its employees throughout their careers. We employ people who are committed to our corporate goals. We are a family-friendly company and expressly follow the legal principles of equal treatment.

The DBI Newsletter.
Receive regular updates from the DBI, tailored to your personal interests.

Login